Still busy with the European Classics Pinball Championships I do try to complete a few more lines of the playfield every other night or so…
Category
»Classic Playfield Reproductions«
First Flash plastic delivered
Just for making sure everything is done according to CPR standards I’ve sent the first Flash plastic (a slingshot) to Kevin Wayte at Classic Playfield Reproductions for a general checkup. If this one’s OK then I should be able to send the rest of these plastics by the end of the week.
Stay tuned folks.
Getting closer
Nearly finished with the Flash plastics now. What’s left is looking over the crop lines and making the art bleed at the right places.
Repro plastics for Williams Barracora
As if I didn’t already have all too much work I’m also doing the Barracora repro plastic set.
Although this was the first project I started it’s unfortunately the least prioritized – for the moment.
Repro plastics for Hotdoggin’
Work in progress from Bally Hotdoggin’ (1980) plastic set. I’m about halfway through this set but can’t work full time on my free time on this due to more urgent projects. That’s too bad as this kind of graphics are quite easy compared to other stuff.
Repro plastics set for Flash
I’m currently working on the plastics for Williams Flash. For being a starter kit – Constantino Mitchell’s art is kind of tough… I’m not exactly looking forward to the playfield…
The stippled art is very time consuming to reproduce – especially when it comes to filling out punched holes. I’m about 1.5 plastics away from completion when it comes to the artwork. And then I will do some finishing touches to bleeds and crop marks and stuff before I send it to CPR.
Repro plastics for The Getaway: High Speed II
Let’s outrun the police and those old warped, cracked plastics!
This is one of my current CPR projects – running parallell with the Bally Hotdoggin’ plastics and the HS2 playfield for B&T Automaten in Germany. Eh, and a few other reproductions for friends and acquaintances…
Repro plastics for The Machine: Bride of Pin·Bot
When I’ve finished work on the Flash plastics set I’ll be taking on the Bride of Pin·Bot… I’ve already tested a promo speaker cutout and this project is going to be a walk in the park compared to the insanely detailed and sketchy Flash art.
Work in progress (click for larger versions):
Member?
Categories
Archives
- March 2011 (4)
- February 2011 (2)
- January 2011 (2)
- August 2010 (1)
- June 2010 (1)
- May 2010 (1)
- April 2010 (9)
Members
- Tony Englund
- Christian Holmsten (14)
- Kjell Ömmersjö
- Daniel Kos
- Ole Jørgen Kristiansen
- Henrik Wängerstedt (6)








